Discussion Locked

Which device is constantly interrupting?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a w2k server (build 5.00.2195 sp4) on a dual CPU IBM x225 with 2.5 gig RAM. The performance tab in taskmanager shows one CPU constantly up around 100% in kernel mode (red). The processes tab shows 'system' (pid 8) taking up most time (25 to 30% cpu). I have concluded that the reason it is like this is because something is causing a rapid rate of interrupts, but I dont know what. The IRQs table under Hardware in the System Information utility only lists the IRQs and not their rate.

Is there anything out there that shows what device is on what interrupt, and most importantly, what its interrupt rate is?

4 replies

by techrepub

Thank you, the KB article helped show that ACPI.SYS is the culprit. Guess I'll have to frig around in the BIOS to see whats what.

by staffan.pettersson

Hi!

Did you find i fix for this problem? One of our costumers have the same problem, on an IBM X225 server.

Best Regards
Staffan

This discussion is closed to new replies.