9 replies
by vue
by joemcal
by paulote
com1 and com3 uses the same irq (4)...if the diagnostic assigns an irq to the modem then windows would show you a conflict...
look at the device manager if the modem have an irq...
or you can look in the bios resume, before loading windows something like :
"pci comm device #" (where # is the irq assigned)...
the bios does not lie...windows...sometimes
Paulo
by joemcal
by randallnord
by joemcal
by rawright
Your question doesn't mention whether the modem works or not. If it's a PCI modem, it may have no assigned IRQs, as PCI devices share resources. If it's working, leave well enough alone...
If it's not, the best bet is to remove it, shut down and physically remove it, then reboot. Shut down again, reinstall it, then reboot and let Plug & Play work it's magic.
by joemcal
by joemcal
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending