7 replies
by spiceman
Could be hardware or software problem - so try one at a time:
If you have two memory modules - use one and see if problem repeats with either memory. If problem occurs with either module then memory is not a problem. If there is only 1 memory module consider borrowing from some one to test theory.
Re-install the CD Rom drivers for the machine and also ensure all patches for Windows 98 are installed or downloaded from www.windowsupdate.com including the service packs.
Try removing the CD rom and starting machine and then re-installing it.
Handle invalid is usually a memory problem or software problem.
Hope this helps as a first stage to try out.
by aplusweb
by felipe
Simple, try another good CD disk and install a program (like a game or free internet or anything or copy the whole CD to c:\temp) just to verify that the CD Drive is operating correctly. If you can not run or copy this CD, then your CD Drive unit isfaulty.
If you are able to install/copy the good CD, then that CD disk is bad (that sometimes happens with heat/scratches).
If you know that CD disk is good and works on another computer, then the CD drive unit could be faulty or failing. They are calibrated units and some older ones start failing like older floppy drive units. Try re-installing the cDROM driver that worked before or simply replace the unit.
by aplusweb
by bstiegirl5
by aplusweb
by aplusweb
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending