Discussion Locked

Windows 2000 Hang Up

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have new workstations with win2000. They are 700mhz celeron with 128mb ram. For some reason they are hanging up. It is happening in all different applications. The only way to free up the computer is to shut the power down and bring it back up. Any ideas?

6 replies

by ipjunkie

Are we talking about identical systems?

Is this a clean install or an OEM image from the manufacturer?

-If it's not an image, you may be missing a critical driver or there may be a hardware/resource conflict.

-You could have bad RAM in these machines, or another bad piece of hardware.

by tdeleo

Tell me more. is there a way to find out if the hardware is corrupt? other than occasional hang ups the computers work wonderful

by ipjunkie

Have you tried re-installing or re-imaging these systems?

If you have done a clean install, have all the drivers correctly installed, and it STILL locks up, then I would suspect hardware.

Troubleshooting hardware takes process of elimination. If this systems has an integrated motherboard, then troubleshooting these systems becomes more difficult.

If you have seperate video, sound and network cards, you can pull these out and start with the basic system with only the video card. Then add one device at a time, always thoroughly testing the system as you go along. The network card should be the last thing that you add. Keep adding cards until it starts locking up.

If you bought these systems from say, Dell or Compaq, then you will be able to download a diagnostics disk that you can run to tell you if you have bad RAM, bad sound card, video, etc.

This discussion is closed to new replies.