Discussion Locked

Windows Protection Error

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Toshiba Satellite 305CDS installed with Windows 98.On startup it gives message "Windows protection error: Restart wyour computer".On restarting the computer it prompts me to start in Safe Mode then it displays a message "ERROR : HIMEM.SYS has detected unreliable XMS at address 01040016.XMS Driver not installed." What causes this and how can I recover from this fault?

15 replies

by beermonster

Hi,
This is commonly caused by a hardware problem, and is covered in technet article Q109845

go to www.microsoft.com/technet (remove any spaces) and search on that article number. I can't really take any credit for this answer, as all I did was search on the error message in technet myself. Hope this helps you....

by aclark

This a almost always a hardware error. I would start by reseating the memory. Which if I remember this model correctly, is on the bottom side of the laptop. Completely remove the memory if the problem persist. There is either 4 or 8 mb soldered directly on the system board, which sould allow you to boot windows without the memory expansion card installed.

by @lberto

Most of the time this error is related to a hardware problem, either configuration or hardware failure at all.
You didn't mention how much memory you've installed. I suggest you to backup your data, check on your BIOS your memory address, try to relocate the address to other segment, or remove your memory expansion card and try to load windows or the last case call your vendor and let them know your problem.
They will change your memory.
Also check if any of the devices you have installed are using somehow the same address as your memory.
If it doesn't work let me know.
@lberto
alberto@pancarib.com

by radai_ar

The Himem.sys Doesn't see correctly the Memory:
1. Try to Re-Seat the Memory module(s).
2. If this did not solve absolutely the problem, try to Exchange it (or them ) . If the problem does persist, the soldered memory can be involved - you will have to get some really professional - maybe your Vendor to re-solder them, or fresh ones . I suppose, it's out of warranty . - Arie - .

This discussion is closed to new replies.