Discussion Locked

Windows won't load.....

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a PC that was given to me to fix. This is the problem. I turn it on and after a few screens...i.e...memory check...I get a screen that displays the following : \WINDOWS\SYSTEM32\CONFIG\SYSTEM Archive is damaged, missing, or corrupt. To reinstall Windows from the CD or Disk. Press "R" at the first screen.

NOTE: THIS PC IS IN SPANISH, SO THE MESSEGE IS TOO. I AM ASSUMING THAT IT WOULD BE A DIFFERENT LETTER OTHER THAT "R" ON AN AMERICAN PC.

I follow that step, with no success. I "F Keys" don't work either. I can only enter SETUP, by pressing DEL at Boot Up.

Please Help ASAP......I am reinstalling WinXP, the PC is a Generic PC...No Brand...what I do know is that it is using a Athlon 1.7 Processor.

15 replies

by simy

What this message is saying is: boot from the WinXP CD and press 'R' at the first prompt. This will get you into the recovery console.

by turkey_bones

If you don't care about saving what is on the PC your best bet is to format the drive and then reload from scratch by booting from the CD. This may end up being what you HAVE to do anyhow. Good Luck.

by sgt_shultz

thanks for your post. occasionally i work on spanish computers but not run into this yet.
to answer, yes, it is the letter r you must use at that prompt.
the blue screen error you describe is becuz one of the registry files is hosed. the r would try to find a backup. this hardly has ever worked for me either.
i suggest a parallel install. you just start the installation process and it finds the previous install and checks for hard disk spasce. it is lenghty but all you have to do is wait and read the screen to find out what partitions and how much room they have. if enuf room you can install into another folder on boot drive, eg winrescue and boot into that to get files off original install or try to repair yourself

by cyberghost_1

How do I go about doing this? I get no Prompt, what I need to do is Format the HD. How can I do this and reinstall WinXP?

by cp7212

Have you tried a MS-DOS boot disk? If you know someone who has another XP machine, they can make one by going to the a: drive, right-click and choose format. There will be an option to make the boot disk there. If your HD was formatted with FAT32, this will be simple. If your HD was formatted with NTFS, it gets a little tricky. If it is NTFS, check out this article... http://support.microsoft.com/default.aspx?scid=kb;en-us;311073
Hopefully, you can get to a command prompt with the disk.

by cyberghost_1

Also how can I connect my PC (Win98SE, Compaq 5000) to the other PC (WinXP Pro, Generic) Which is the one I am fixing. The WinXP PC does not have an Ethernet card, only a Fax Modem. Is there away to link the two so I can Format it?

by p_rego

Try rebooting and at start up..hold down the escape key....as the screen comes on u should see the drives to boot from ... select CD..and reboot the system using your XP disc...that should help.

Good Luck.

by dkzgambo

If its about starting from scratch, then try booting from a bootale MS-DOs floppy diskette. Run FDISK to fromat and partition the hard disk. then install it from CD.

This discussion is closed to new replies.