1 reply
by wisejra
To configure multiple IP addresses, follow these steps:
Click Advanced from the IP Address Tab of the Microsoft TCP/IP Properties dialog box (see "Configuring TCP/IP" earlier in this chapter for instructions on getting to this dialog box). The Advanced IP Addressing dialog box appears
Specify the Default Gateway for one network adapter in the Advanced IP Adressing dialog box
Select the adapter you want to configure in the Adap_ter drop-down list box.
NOTE: Any IP address, gateways, andsubnet masks that you define are set only for the adapter card you select.
If your computer is connected to a network that has multiple IP networks--these are logical, not physical networks--you can define all the IP addresses and subnet masks. Choose Add and type in the IP address and subnet mask, then choose OK. The new IP address and subnet mask appears in the list box.
Softwarepluscomputer: Your Computer Technology Source
http://www.vstore.com/vstorecomputers/threestepcomputerstore
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending