Question Locked

Wireless Network Association Failed

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can't get onto my wireless network since I used an Ethernet hookup at a hotel during a recent business trip. Previous to that my wireless connection to my host was fine.

I'm running a Lenovo R60, Windows XP SP2. When I run initiate the Wireless Connection Status on the tool bar, the radio is always Off. I turn it on and am told that the radio is powered on but not associated. and Signal quality is poor.

Wireless Settings indicate the correct Current Location Profile, but the SSID is blank. Network Type shows Access Point (infrastructure) and Security is WEP 64 bits.

Adapter details seem correct.

Under Wireless Settings when i try to FIND WLAN I click on the correct wireless network and try to connect. I get an Diagnostic Error Code 010. If I try to fix the problem the Diagnostic Tools indicate Error 010; if I click IP Configuration, the IP Address and Subnet Mask for the Wireless Adapter are 0.0.0.0. I've tried to Repair and Release the IP Address but both have failed.

Does anyone have a suggestion?

I hate to spend $125 with IBM to solve what I believe is a minor problem.

Thanks.
Jerry

4 replies

by wendyannmjohnson

so what was the conclusion? I'm having this very same problem as you've described so kindly advise the solution. Many thanks in advance

WJ

by jarcuri

I ultimately called IBM and spent hours on the phone over the course of several days. Finally, the tech saw that my MAC address was incorrect. Once that was re-input the problem was solved.
Good luck.

by w2ktechman

lock onto an AP or network, even if if it becomes unavailable. Also, there can be issues associating if for some reason your firewall has decided to block access.

The easiest way, is to uninstall the card and reinstall it. This fixes these issues about 70% of the time for me.

This discussion is closed to new replies.