have a look at your network connectivity selection accounts if you are using windows wireless network manager. In the connections (of the card, not physical connections), you have a list of "prefered" accounts to connect to. Remove all and depending if you have the latest version of the wireless software, you can set it to not automatically detect and connect, and you only specify by SSID and channel, which network you want to connect to. If it detects a single broadcast packet from one of these accounts, then it will try and connect to that, then fail cause the signal is not strong enough, then move to the next prefered network, which is probably the one you were on in the first place.
Make sure that you are not on the same channel as any other possible sources. Use a netowrk detector (Network Stumbler) to scan for any wireless activity that may be interfeering.
Take your card of auto-detect and specify the connection standard a, b or G rather than b/g-auto.
If the connection is being dropped very often, set network stumbler running on its own, and monitor it, see if you get any specifically high noise to signal ratios, or any rouge access points or other networks bouncing up.
It is even possible that something completely un-computer related may be causing the problem. I had a client who had a problem similar to this when sitting in his front room of his home wireless network, when his connection would drop randomly, nothing specific. It was actually associated to when his girlfriend put the microwave in the kitchen on and interfered with the signal.
Also could be some settings on the Access Point it's self, load and traffic and such. What kind of AP/Router are you using? What is the environment.
Could be many things.