5 replies
by a_r_leonard Accepted solution
by Former member Accepted solution
Of your connections.
1) Computer will not boot if the processor is not seated/connected properly. Solution: Take it out and re-seat it.
2) Computer will not boot if the memory is not seated/connected properly. Solution: Take it out and re-seat it.
3) Computer will not boot if the power supply is: Faulty, not up to the job (IE: not powerful enough), connectors to the motherboard are not connected properly.
4) Computer will not boot if you killed it with static. Solution: Wear a static wrist strap (AT ALL TIMES) when you do a update or repair inside your computer.
Please re-check all of the above and repost if you are still having the problems.
Please post back if you have more problems or questions.
by a_r_leonard Accepted solution
by oh smeg Accepted solution
At the best of times. Whenever you hit a problem with any E Machine Computer the first thing you should try is replacing the Power Supply with a Known Good One.
As you have just been swapping parts here without first testing them you can not even be sure that you actually have something that can work. Instead of changing everything Willy nilly you should start making 1 Change at a time and see what is required to make it work again.
Just a side note when you swapped out the PS did you even look at the Power Ratting on it and compare that to the new one? You should be looking at something in the 300 W Range to replace the old one with. If you went smaller when you changed the PS it's unlikely to work.
The Green LED is telling you that the 3 Volt Rail is getting some power but with the Fans not running the 12 Volt Rail doesn't have any power and quite likely the 5 Volt Rail doesn't either. Try fitting a Known Good Power Supply and see what happens next.
Col
by rob miners Accepted solution
Getting to know your power supply by Faithe Wempen
http://articles.techrepublic.com.com/5100-6349-1046822.html
I think that it needs replacing. Also make sure that you are using CPU Grease when replacing Heatsinks. Check the Capacitors for bulging. Check that the Fans spin freely if there is any resistance replace them.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending