Question Locked

workgroup computers can't see each other

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We just added a computer to a pre-existing and perfectly functioning workgroup. It can file share and ping with all but one other computer, but it and that one computer are not recognizing each other in any way. (Yes, the 2nd computer is still sharing just fine with all the other workgroup computers.) If I view network computers and try to access either from the other, I get, "not accessible...might not have permission...the network path was not found." I've been through all the Microsoft support online suggestions. Any ideas?

5 replies

by sgt_shultz

or try login with account that has local administrators rights on both boxes. if that works then the 'check user accounts' advice applies.
i have seen weird stuff when nic media type was not 'auto sensing' correctly. maybe try locking nic to say 100mb full duplex on the bad box...also worth having a look in the event logs on bad boxes

by cg it

how many computers in the workgroup?

by working it

Make sure the added computer have the same Workgroup Name and IP settings (not the IP address) with other pre-existing computers.

by thumbsup2

I have seen times when the network settings weren't set correctly, even thought they appeared to be ok. For some reason, file/printer sharing doesn't get turned on correctly.

Try double clicking My Network Places (or Control Panel/Network Connections). On the left menu, use the "Set up home or small office network" wizard. Presuming you have a router/hub assigning all of the IP addresses and allowing internet access through it (not sharing one connection through one of the computers), choose the first "other" option to get to the network gateway choices. Follow the instructions and let it complete the setup.

Hope this helps.

This discussion is closed to new replies.