Discussion Locked

1 video card ?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hi, I recently installed a Creative tnt2 pci video card in a pc and PnP picked it up and I installed the drivers but now it comes up looking for a standard graphics pci adapter also, if I cancel it it will just come up next time I restart. I had onboard AGP but I changed it to PCI in the bios. I don't think I am getting the full capabilities of the 32mb pci video card if the standard one keeps wanting to be installed. Any help would be appreciated. Thanks, Kennie

3 replies

by wyldchilde

Most likely, the onboard AGP hasn't been disabled. To disable it, contact your MB manufacturer (it's usually a bios setting or a jumper on the mb since most boards have gotten away from auto-disabling onboard video). Once you've disabled that, boot into safe mode (hit f8 and choose option 3 at the menu). In safe mode go into device manage and remove the listings under display adapters. You may also have listing for pci display adapter under the other devices category. Remove those as well if that category is there. Finally, remove everything under your monitors category. Uninstall the drivers for both your old video card and the Creative card. Delete drvidx.bin and drvdata.bin. Reboot and re-install. That should take care of the problems. Feel free to email me if you have any other questions.

This discussion is closed to new replies.