Discussion Locked

162 system options not set

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a compaq neoserver, it has a 166 mhz processor and a 8gig quantum hdd. ever time i try to install ant OS it pops up the message "162 System Option not set". It didn't come with a cdrom or floppy but i have installed them and had linux on the system. aftet the message a L appears in the top left of the screen. this is a linux code for media error.
please Help.

7 replies

by cdobbin

not too famliar with that particualr error, but if you say this is happening after having linux on the machine, try running fdisk /mbr then sys the drive and install you new OS

by mskiproductions

AS the above post says, you need to run FDISK from your OS setup disk, delete all existing partitions, and create a new primary DOS partition to.

You will then be able to install your OS.

Good luck.

Matthew Shine.

Computacenter, Europe.

by ravindra kumar chauhan

It seems that CMOS settings are wrong due to bad cmos battery or some other reason.
Open the CMOS setup of the computer and load default values and also check any other setup mis configuration. Save and exit.

Hope success.

This discussion is closed to new replies.