Discussion Locked

1GHz P-III Processor Motherboard

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi everyone,
As you may know, with all the current hype about the 1GHz processor, I have been requested to build a system containing one. The problem that I am having is as follows:

I can't find a stable, trustworthy motherboard to support a P-III Slot 1 800MHz to 1000MHz processor.

I have looked at the Tyan Tiger 133 S1834D, but only to be somewhat confused and discouraged by the reviews about problems and compatibility issues such as "slow USB".

The ideal motherboard would be using an
Intel Chipset, a SLOT 1 interface, SDRAM (not that expensive RAMBUS), and would be very reliable!

The only boards I can seem to find are all FCPGA, which I am not crazy about!

If you know any motherboards that use an Intel Chipset, a Slot 1 interface, SDRAM, and are quite reliable to run an 800MHz to 1GHz P-III processor under Windows 98, please post a reply! Thank you very much!

Thanks again,
Hotsticks5@aol.com

9 replies

by dcosgrove

You can do some good research on www.motherbards.org , the site has a tool that you can plug all your variables into and get suggested products. My search came back with the ABIT SH6, but you may want to check yourself and look at some of the reviews.

by grantcom

Personaly I would recommend the ASUS CUSL2..although it is not a Slot 1. I recommend getting away from slot 1 for 2 reasons. You will be seriously limiting your customers upgrade path in that Slot 1 is heading the way of the 8 Track and secondly theslot 1 tends to have seating issues. What is your problem with the FCPGA? The CUSL2 has 5 USB ports and supports UDMA 100 drives and of course is 133 bus. IMHO Asus makes the finest boards known to man. Psst....their CD drives are the finest as well.

by pdpjp

I have built three systems using 1GHz processors on an Intel D815EEA motherboards which support FCPGA and have not had any problems with them. I highly recomend them.

This discussion is closed to new replies.