8 replies
by tentaro Accepted solution
by ---tk--- Accepted solution
One thing I always do when I first install an OS is go into the power saving options and turn them all off, and I am pretty sure that Win 7 has turn off drives after so long if they are not active (default), change that to never...
I am running the same version as you, and I have two Data drives. I have not had that issue. I would also check the power connection to the drive, vibration of the PC could wiggle it loose (wouldn't be the first time).
Another thing to think about is heat. If the drive is a few years old, it might be starting to go out, so I would suggest start preparing for the worst... Or maybe look for drives on sale... Heat is a PC's worst enemy, it causes parts to expand, and when it cools down the expanded parts contract, which makes them appear to be normal again... Just a thought...
Best of luck!
by cpubymike Accepted solution
Win 7 RC is past its doomsday date and does a memory dump every two hours.
If you need a multimedia DVR on the cheap as in free and beer and all that
try installing Mythbuntu.
you can review it on their forums and run the live disk and play around with it till your shure its what you need.
If you use and you are sure your system is set up the way you like it
use Remastersys Backup to make a new iso image of your system that will give you a custom spin on what you have already done.
If your chained to Windows re-install xp or whatever os came on your machine and look for a free/opensource/shareware version of your DVR software
by older mycroft Accepted solution
The Windows 7RC will not start to exhibit odd behaviour every 2 hours until after [b]March 31st, 2010[/b] and at that time, it won't just shut down individual drives - it'll shutdown completely.
It will not function at all after the end of June 2010.
by tentaro Accepted solution
by oh smeg Accepted solution
If this is a IDE Drive and your HDD with the OS on it is a SATA Drive if you replace the IDE Drive you will be unable to boot the system without doing another install of the OS.
The reason for this is because the Hardware treats any IDE Drive as the Primary Drive ahead of any SATA Drives and it is to the Primary Drive that the very first files are copied to when you start to install Windows and they are needed to point the Hardware to where the OS Resides. So no Primary Drive not Primary Boot Files and no Boot.
Instead of thinking that it is 7 turning the drive off how about a Software Conflict occurring and as that software crashes it kills the drive that it is saving data to. Sounds more likely to me that does, ;)
Also before you do anything at all in relation to possible HDD problems you need to test the HDD with it's Makers Testing Utility which you can get from here just click on the Drive Makers Name.
http://www.tacktech.com/display.cfm?ttid=287
Lets know if the drive fails the test. If it does you can then need to replace it as a Failing Drive but if ti doesn't fail the test there is nothing wrong with the drive.
Also if ti fails the test you need to remove the HDD and test again in another computer, if it passes the second Test the M'Board, Data Lead or Power Supply in the original computer are the problem not the actual HDD so whatever is faulty needs repairing.
I think that you'll find you have a Software Issue here that is brought to a head by attempting to Record the same thing on different platforms in different locations from the same source at the same time. ;)
Col
by tentaro Accepted solution
Well I ran the every test in the Seagate/Maxtor tools except Advanced(only because it might ruin the data already there) they all passed so I am liking the possibility of your other answer, since both times it has happened it was recording live tv in WMC. Thanks to all for the info. eventually gonna look into a SATA drive anyway to replace it.
by oh smeg Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending