Question Locked

3 Partitions in 160-GB Drive OK......?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I wanted to build a XP SP3 PC with 160-GB drive with 3 Partitions, as follows:

- first partition for OS and Programs, etc.
- second partition for Recovery, saving for boot in case First Parition fails.
- third partition for Spool Folder.

Is this a "good" design if the goals are to Speed-up Printing, and Recover Quickly if First Partition Fails???

Thank you very much.

8 replies

by rob miners

I like to work in multiples of 4096 so multiply that by 6 or 8 and you have a Primary Partition of 24576 or 32768 depending on what you intend to install on the Primary Partition. The smaller the better as the read and write heads don't have to travel so far.
If you set a Primary Partition to 32768 and then create a Partition of 110GB you should have around 7-8GB left for another small Partition. You could move the Spools Folder to it along with your Pagefile.
Windows seems to like it and perform better by setting it up like this.
If I install Games I install them on a seperate Partition and I only keep the basics on the primary Partition. I even redirect My Documents to another Partition which is normally D: drive.

by oh smeg

If the idea is to speed up Printing you would be better with a second small HDD and have the Print Spooler and Swap File on that.

2 Smaller Drives allow faster Read Write times than 1 Bigger drive can ever manage.

Col

by philldmc

You can have a total of 4 partitions per drive or virtual drive (Raid Set)for Windows.

But I agree using a smaller drive for page caching and swap drive, ideal for Photoshop using large files, is best.

by ic-it

Primary partitions, you can have as many logical partitions as the lettering will allow (you can also mount a drive without a letter).

by rajsdoshi

I learned a lot.
I appreciate your time.

Thanks to you ALL again!!

by rob miners

Keep us informed as to your progress if you require further assistance. ;) :D


If you think that any of the posts that have been made by all TechRepublic Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D :-bd

This discussion is closed to new replies.