5 replies
by thechas
Question?? Does the computer work correctly and allow you to boot into Windows after the error?
If so, I am confused.
If the computer WAS working fine, and now does not, here are a few things to check:
Make sure that the mouse and keyboard are plugged into the correct ports.
Next, you will need to open the case.
You want to make sure that ALL plug-in cards, cable connectors and the memory modules are properly seated.
If it still does not work, my next suspect would be the battery that backs up the BIOS settings.
If the battery was weak, the process of unplugging and moving the PC may have caused the BIOS settings to become corrupt.
The best way to check this, is to remove and test the battery.
If the battery is weak, you need to clear the CMOS settings, and install a new battery.
Then, when you boot up, you will need to enter BIOS setup and adjust the BIOS settings as needed.
At a minimum, you will need to set the date and time.
Chas
by granogue
by granogue
by granogue
by gralfus
Compaq only has three solutions to this error:
1. Replace the keyboard
2. Replace the touchpad or mouse
3. Replace the system board
http://www.compaq.com/athome/support/msgs/1800t-1825/power1.html
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending