Discussion Locked

3com CS2600 commserver & internet access

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does anyone know if the 3com CS2600 commserver is cabaple of gaining internet access to its pc-based clients that are connection to it via asynch serial ports? The commserver is connection to 10-baseT ethernet which connects to a LAN which has internet access? If there is a way, how is it done?

4 replies

by csmith

If I understand the question, you want to take the CS/2600 and connect PCs to the DCE serial ports, (Ignoring Port 0, the Console) and have the IP packets come from the LAN to the PCs, (And vice/versa) with proper addressing.
I have never tried this, but I have a gut feeling it might work.
I assume the PCs are running Win98.
The hardware hookup is simple since it is just a serial port on the PC to the serial port on the CS/2600. The only problem is to make sure one serial port is DCE and theother is DTE. (Or use a null modem cable if they are both the same.)
The real problem is in the software configuration.
The Win OS can establish serial links to another PC, and that is what the CS/2600 would look like to it.
Now the heart of the problem:
The PC has to be the guest and the CS/2600 has to be the host, because the CS/2600 is the gateway to the TCP/IP network.
For a Win98 guest to function with a TCP/IP gateway host, the host has to run NETBEUI with the guest under directcc.exe .
If the CS/2600 can run NETBEUI, (I have forgotten this fact)
install Direct Cable Connection on the PC, and the connection should work.
WARNING! Make sure that all Dial Up Networking is removed from the PC, or a conflict will occur in pppmac.vxd

Regards , Chris

This discussion is closed to new replies.