Discussion Locked

3com hubs losing connection

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 24 port 3com hubs in three different locations on our WAN, all three locations have approx, 3o computers, some with 10 base T and some with 10/100 network cards. At all three locations the computers will lose the connection to the server. If we unplug the the power to the hubs and plug them back in after about 30 seconds they work fine for a couple of weeks, when it needs to be repeated. Any help on this problem would be appreciated.rstary@hotmail.com

7 replies

by rickh9

This seems to be a chronic problem with certain 3Com hubs, Office connects in particular. When we contacted 3Com about the problem they told us it was an auto negotiation problem even though we use all 3com cards as well. The solution was to manually select the speed and port type in the card configuration. Some of our 10T cards had to be replaced with 10/100 and then manually set in order to get them to work. Has really turned us off to 3Com products.

by tbradley

It's a grounding problem, and can be solved by the simple process of putting a grounding wire jumper from the metal frame of the hub to the rack, or a solid metal object if they are not rack mounted.

It's a common, tho undocumented problem of not only 3com, but many other low end hubs without redundant power supplies.

by false_angel22

rstary...

Just wanted to let you know that it is an autonegotiation issue. When you reset the hub it renegotiates the speed. But just to let you know...3COM is not the only vendor that has this issue...In fact most do...recommended is to hard-set either 10 or 100 to all pc's and servers.

This discussion is closed to new replies.