Discussion Locked

3Com U.S.R V.90 Telephony WinModem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Installed a new hard drive in my Dell XPS T500. The new drive is a Maxtor ATA/133 40GB. Installed an additional 256MB of memory also. Everything booted, was recognized and seems to work well including my audio and video drivers. Unfortunately No Modem. The system recognized new hardware. I found new drivers but when I get to the point to install them I get a message that the necessary hardware(modem) isn't recognized. I've gone into safe mode and deleted the 3com.USR modem as well as the PCI Communication Device and have reset NVRAM but still get the same results.
There doesn't appear to be and IRQ conflict although the PCI Communication Device does have the yellow ? mark in front of it.
any suggestions?

7 replies

by thechas

1. Have you installed the chipset drivers for the Dell system? The default Windows drivers often are not sufficient for plug-in cards to function properly.

2. Make sure that you have the correct drivers for the modem. If the modem was an OEM from Dell, the Dell driver may be the only one that will work with it.

3. What OS are you running? And, how much memory do you have?
There are problems with Windows 9X/Me and over 511MB of RAM.
Among the symptoms, is problems installing and loading drivers.

Chas

by yacco

Try going to the properties screen of the PCI communication device. Go to the driver section and select the update driver button. Point it to the directory on the modem install disk that has the .inf files for your os. Often Winmodems will automatically install if the correct drivers for this are in place. If Windows does not immediatley recognise the modem, reboot.

by macwilly66

Thanks for the information. Although the modem was manufactured by 3Com USR it was a special production for Dell. I was finally able to track down the correct drivers via Dell, installed them and all works well. Took awhile for Dell technical support to guide me to the right place but we finally arrived.
Thanks again for the input.

This discussion is closed to new replies.