Discussion Locked

40 g.b not getting detected

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have got p-III and i am not able to get my new 40 G.B. hard disk detected in my pc. the hard disk works fine on p-II and it doesn't work on my pc. so, what can be the exact problem ?
Please help me with this problem?

9 replies

by dmiles

Make sure the jumper configurration is set on drive
Boot computer and press key to enter CMOS panel to BIOS
Go to Hard drive listed and set to AUTO detect
save and exit
The other thing to do is check to make sure you have the latest bios versionon your machine
To update BIOS go to manufacturer web site,download flash update and then use read me file to update.

by mrafrohead

Another thing. If for some reason your BIOS doesn't support that size of HD, check the HD's manufacturer site for something along the lines of an EZ-BIOS. It's a little addon that is added to the HD that will help to trick the BIOS into letting itwork.

I personally don't care for those things, and would rather partition the drive, but that is another option.

First thing though, is check on a BIOS upgrade as SoulRider suggested!!!

mrafrohead

by pid

Hi,

You don't say if it is a second HD. Is the master/slave jumper on the HD set correctly?

by purplebook

Your BIOS is too old! Check the information after POST during bootup (at the bottom of the screen)for the serial/product ID of your BIOS. Then go to your the maker of your Mainboard and see if they have a BIOS upgrade.

This discussion is closed to new replies.