Discussion Locked

52.01 error on HP 5Si NX printer

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am working on a 5Si NX not covered by HP warranty.
I am told by owners that problem existed from first day, but no one followed up the error (happy to be printing).
I can not call Hewlett Packard from site.

Error 52.01 cold-startup.

Lens and photo assembly clean and properly seated.
Power off then on, removes error and unit prints normally, copies are clear and without any sort of distortion.

I installed maintenance kit.

Error 52.01 persist @cold start.
Error "personality or jam cause" list (point to) PCL.
PCL menu has only one setting, which I don't know how to change.

? What could be reason for this error?

4 replies

by isys

According to the book for this printer, 52.1 errors are scanner subsystem related, either startup or rotation. Check the drive motor and lens to see if they are dragging. You might also give it a shot of an electrical cleaner with a little siliconin it (like Nu-Trol Control Cleaner).

Go here:

http://www.hp.com/cposupport/eschome.html

and search for laserjet 5si nx. It will take you to the book.

by tonytech

It took me a while, but,
Thanks for the reality check.

My clients were looking for something beyond the facts.,,,manual states.,,,turn off then on

And I was foolish enough to go beyond my ethics,...
If it?s not broke, don't fix it...programming is not my strong suit

This discussion is closed to new replies.