Discussion Locked

5si Prints PDF Documents Slow

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 2 HP 5si printers. We are running windows 2000 server. When you print a PDF file a few pages will print, then sit for awhile and then print a few more. They both have the same amount of memory and both have spooling set up. They both use the same driver, but only 1 of the 2 printers has this problem. We had this printer for a few years now and never had any problems printing a PDF file until now. No changes to the printer were made when this started. Any ideas?

5 replies

by jschein

This error occurs for two different reasons.

1. you must uninstall adobe on the affected machine, reboot, re-install it...

2. you are using ps printer drivers instead of pcl...

Good luck

by daryl.schroeder

We are using the PCL drivers.
1.This happens from several different machines.
2.I can print to the other 5si from the same machine and it prints fine.
Also, both prints are on separate NetPort print servers.

by stuart_at_oz

Check the default printing resolution of both printers - YOu may find that the slower one is printing at a higher resolution, so it will take longer to spool (on the computer) and take longer for the printer's processor to, um, well, process.

If you double the resolution (say from 300dpi to 600dpi) you are actually quadrupling the amount of information required to print image file (and many PDF's contain images)

Stu

by daryl.schroeder

It was set at 600 dpi, I changed it to 300 and it worked. But both printers were set at 600 and only one had problems.

This discussion is closed to new replies.