Discussion Locked

60Gig HD and an Award 4.51 PG BIOS

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm looking to install a new Western Digital 60 gig hard drive, and my computer, and i'm wondering whether or not my bios (Award Modular BIOS 4.51 PG/Plug & Play Extension 84'-96') will be a problem. Will i need another controller card? Pls advise. Thanks.

5 replies

by dmiles

This could depend on how old the system is and what model of the system.
Most bios within three years will most likely support large capacity hard drives (PIII or better),using a controller card will not be to your advantage as a work around if thebios does not recognize the drives capacity.
Check the bios manufacturer web site for update,this should apply to motherboard too.

by thechas

The Award BIOS revision is not the primary key here. Award only provides the 'core' BIOS code. They may under contract write the specific code for the motherboard mfg.

The actual specific code that the motherboard manufacture created for the board is the limiting factor.

If this is a 'name-brand' system, you should be able to get the specifications, or any BIOS updates from their web-site.

If this is not a name brand system, you need to identify the motherboard, and check with the motherboard mfg for specifications and updates.
Check out the ID tools at www.wimsbios.com
or www.motherboards.org

Chas

This discussion is closed to new replies.