17 replies
by fenaikh
Hi
Hard Disk Size Barriers
BIOS and OS are the cause of many configuration and capacity limitation problems. There are many option and it depends in what type. Overly or flashing a BIOS installing a new IDE.
more info in these :
The 240 Head Int 13 Interface (7.38 GiB / 7.93 GB) Barrier
The Int 13 Interface (7.88 GiB / 8.46 GB) Barrier
The Windows 95 Limit (29.8 GiB / 32.0 GB) Barrier
The 65,536 Cylinder (31.5 GiB / 33.8 GB) Barrier
Hard Disk Size Barriers
http://www.pcguide.com/ref/hdd/bios/size.htm
Good luck
Mohamed
Note1:
***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********
by bogie.1
by mmerritt
by bogie.1
by sonnguyen
Hi there,
Connect this drive as master hdd on a 2-3 year old machine, do not connect any other hdd except this 80GB hdd.
Boot it up with a win95 or 98 floppy, make sure inside the floppy there is a program called debug.exe program. At the A> prompt do this
debug [ Press Enter ]
a 100 [ Press Enter ]
int 13 [ Press Enter ]
[ Press Enter ]
rax [ Press Enter ]
0301 [ Press Enter ]
rbx [ Press Enter ]
200 [ Press Enter ]
rcx [ Press Enter ]
1 [ Press Enter ]
rdx [ Press Enter ]
80 [Press Enter ]
f 200 L 200 0 [ Press Enter ]
P [ Press Enter ]
Q [ Press Enter ]
reboot the machine with the floppy again and use fdisk to create a partition. you should have a full capacity after this. The problem was because you must have used some overlay s/w (soft ide) from the hdd manufacture and this become corrupted so the debug program would remove it. I never failed to remove this type of s/w with this program. Good luck.
by bogie.1
by thechas
When the drive was in the XP machine, was it formatted as a NTSF file system?
If so, that may be your problem.
If you are using an older version of FDISK, it may not see the NTSF partition.
I have been able to delete primary NTSF partitions using a W98SE startup disk.
Some peers have reported problems deleteing logical NTSF drives and extended partitions.
I believe there is a link to a more powerful fdisk at www.fdisk.com/fdisk
Chas
by bogie.1
by djent
by bogie.1
by roger.gibson
by bogie.1
by b_pope
fdisk will not report the correct size of a drive when used to create partitions larger than 64GB, what happens is it reports the size as being the difference between the two. A 80GB drive made into one partition will result in 16GB deing reported as your drive size.
In your case it's reporting 10GB which makes me think you still have a 6GB NTFS partition left on the drive. Fdisk can't delete NTFS partitions you'll need a program called "delpart" available at bootdisk.com, but I would slap your bootdisk back in & type fdisk & select 4 display partition info & see what shows up first.
Microsoft has a fix for fdisk so it will create partitions larger than 64GB, MS article Q263044
by bogie.1
I had a similar problem and solved it by placing the HDD (and IBM in my case) in the XP machine and use the Disk Manager (within the Computer Manager, from Admin Tools in Control Panel) to create and format 4 20GB primary partitions on the drive. I found that the Win 98 would recognise upto 32GB, but not 40GB, and that it sometimes disliked 30GB, but always recognised the 20GB. I had tried using 1 primary partition and an extended drive but the 98 machine hard trouble with it. With the 4 20GB primary partitions it has always managed to find all 4 partitions and thinks they are 4 physical drives.
BTW this is all dependent upon the motherboard BIOS being able to handle a 80GB HDD as well.
by bogie.1
by bogie.1
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending