Discussion Locked

A Graphic Problem ?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I run Win98, on a fairly elderly machine which usually works well. Recently, the old dear has refused to start occasionally. The power light comes on, and the HD spins, but the keyboard & mouse are not initialised. When it is working normally, itworks perfectly. But now and again it will not start at all. Switching off and then on again has no effect, but if I switch on and leave it in this "comatose" state, it will sometimes fire up later (in its own good time).
I am advised that my graphics card may be faulty, or about to fail. Anybody got any better ideas?

5 replies

by jimmy

Hi it sounds as though the motherboard may be the problem rather than the Graphics Card.
If a Graphics card goes normally it GOES. Normally this will be in discolouration or just black screen.
Sounds more like the HD or the Motherboard itself.
What i would do is backup any data required and then format the HD and see if that cures the problem. You could first see if it is a corrupt registry which i very much though by doing scanreg /restore by selceting start PC in dos mode.
If this doesn't work try format c: to wipe the HD.
Sounds to me though as if the Motherboard is on it's way out as there are no error messages.

by parvus1202

Keyboard and mouse are not in anyway connected with graphics card, so whoever told you that is a lunatic. Sorry. If it is old, then it is old, buy a new one, buying a new motherboard wont help. Just buy a new computer will you?

by thechas

You may be able to revive this PC, or at least track down what is going on.

(Use proper ESD precautions to avoid causing any new damage)

First, check both the CPU and power supply fans.
With power off, they should spin freely.
If either fan sticks or binds, then the fan is bad, and the associated device may be damaged.

Next, CAREFULLY clean out the accumulated dust.
I tear down the system, and use canned air.
Being careful to not force dust into any sockets.
If you use a vacuum, take care to not let the nozzel touch any components, as it will have a large static charge.

Remove and reseat both your memory modules, and the plug-in cards.

Still having problems?
At this point, you need to decide how much time and effort this PC is worth.

I would next try running without a modem and / or network card.

Then, swap out the CPU and RAM.

The hard drive is another possability, as it may not be responding at each boot.

Chas

by rboggio1

If I have interpreted your question correctly. I am assuming it?s a MB with a PCI video card. Your statement: The power light comes on, and the HD spins is at one point in the POST/BOOT process. Your statement: the keyboard & mouse are not initialized is another part of the process. I have to ask how do you know the mouse and keyboard are not functional? You statement makes it sound as if the video is never active. When you first start the computer the processor gets its power and has no memoryso it executes the "jump" instruction telling the processor where to go find the BIOS startup program. Once the internal BIOS program is run it looks for the video cards built in BIOS program and runs it. Then normally, the IDE/ATA hard disk BIOS will be found at and ran. The BIOS then performs a "system inventory" to determine what sort of hardware is in the system. Do you in fact see the HD light active? That would suggest that the IDE BIOS has been executed, that is after the video BIOS execution. Just to hear the drive spin up only indicates power to the drive. If there is no HD activity indicated by the light despite the spinning up this would suggest a faulty video card or BIOS. I have to ask when you leave the power on and it ?just?comes on. Is the system up or does it continue to boot into windows normally. If its up I would suspect very strongly the video card. If it continues to boot into windows it will need further diagnosis. ( I would still suspect the video) If the machine is that old I would suggest replace the CMOS (BIOS) battery first thing. If you recall your normal POST/BOOT processes you see video card then BIOS info long before you see windows stuff. Your OS (WIN98) is not the problem. Side note I have seen keyboard controllers go bad and do this same thing. Usually this is an all or nothing failure not intermittent as you have described. After all this it still could be the MB.

by j.dodd

I tried the suggestion from TheChas, and it rectified my fault. So thanks, TheChas, for your help.
I also added an exhaust fan, reasoning that heat and dust may be the root cause. My machine now sounds like a jumbo jet taking off, but boy, is it clean!

This discussion is closed to new replies.