Discussion Locked

Abandoning the 3.5 floppy drives.

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We want to market a computer to our clients and not include a 3.5 floppy drive. The units will all be running XP Pro and have MB with the 845 chipsets. What problems would we have doing this if any? We want to use the slot in the case for a daughter board with a proprietary pieces of hardware.

8 replies

by nmlhaus

I don't think you'll have too much problem. In CMOS, set the floppy to not installed, under boot sequence make sure that C:drive is first, unless you want intervention with a boot CD, in which case, set sequence to cd, ten C: Good luck

by cg it

There aren't any network/machine problems you will encounter by not having a floppy drive installed on client computers. From a security standpoint, not having floppy drives is highly desirable. Users might complain as they will not be able to save to disk any work. Make sure that XP doesn't search for a floppy drive everytime it initializes .

by ann777

You should not have any physical problems. But I advise that you include a CD-RW for backing up data files (since they will not be able to do so without a floppy). There's also the diskonkey products (a very samll usb storage device that comes from 8 MB to 512 MB) that you can provide for personal storage... www.diskonkey.com

If you look at new notebook/laptop computers, many manufacturers do not include floppy drives as standard anymore (you can pay the extra bucks for it, but it is notimperative to have anymore).

This discussion is closed to new replies.