Discussion Locked

Adding an IDE hard drive in SCSI system.

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have added an IDE hard drive to a SCSI system on a WinNT 4 SP6 PC. The problem is that under Disk Administrator you can see the IDE hard drive but no drive letter. You can assign any drive letter but when the PC restarts it looses the drive letter. The PC boots from the SCSI hard drive. The SCSI controller is onboard.

1 reply

by m.a.s. matrix

If the IDE Drive is not formatted or particianed do this first under fdisk or in another system and this should fix the problem.

Hope this helps

This discussion is closed to new replies.