7 replies
by tjnash09
If both cards are the new standard (you can check by looking on the bottom of the ram card, new standard has two sections of connection areas, old has three)
Than you should be fine. Go ahead and install the new one. If you experience problems remove the upgrade and keep with the stock card.
by cyberghost_1
Poster rated this answer.
by softcorp.us
Hello...
You are right to question this because RAM sticks come in different "electrical" configurations. Some RAM sticks won't work in some computers even when they appear to have the same specs.
But, the answer is always the same: Try it. If the specs you can see appear to be correct (voltage, bus speed, etc.), try it. If all of the RAM can be seen by the operating system, and the system is stable, it is fine.
Note: "Seeing" all of the RAM is a key point. Sometimes the compatibility problem between a motherboard and a RAM stick results in only half of the RAM being seen by the operating system. The system runs fine but only has half the memory it should.
I hope this gives you confidence.
-----Steve Jackson
CEO/CSA
Software Corporation (Softcorp)
http://www.softcorp.us/probono
Advanced pro bono tools and utilities free for personal use
by cyberghost_1
Poster rated this answer.
by dmiles
Generally you donot want to mix memory modules,the timing could be different
Why not install the memory in the machine to see if it works,no video display or system starts to crash are warning signs.
Kingston tech support could be the best bet to get the info on whether the memory will work
by cyberghost_1
by cyberghost_1
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending