Discussion Locked

ADSL modem as uplink for 3com Hub

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having a hell of a time trying to connect a simple LAN network from a 3Com dual speed 10/100 16 Port Hub. The ADSL connects through a Alcatel Home Connect Modem/Router (whatever they call it) which has a RJ11 input conn & a RJ45 output connection which is going to the #16 port on the 3 com HUB (which is the uplink port). I feel as though I have tried it all w/o success. Wondering if anyone knows if the Alcatel ADSL Modem is compatible with the 3Com Hub, or if there is something else needed. Any help would be great.
thanks for your time.

6 replies

by jeffryg

I haven't tried the dual NIC cards in 1 system yet, really didn't want to do that.

by bart777

2 things to try...

First, put the cable in a different port on the hub. If this is a straight thru cable it should solve it. Also make sure that there is nothing in port 15 as most hubs have 1 port that cannot be used when the uplink is in use.
If that does not work, try a crossover cable from the Modem to the hub uplink port. Again make sure that you are not conflicting with another port.

Best of Luck

by vertex

Not too sure about 3Com hub, but the hub that I am using has got a switch that I have to push in to make that port an uplink port using a staright cable. With all Modem/Router you should have a web base interface for you to configure the device. This function should be in the manual that comes with the Modem/Router. It should give you the setup configuration for the router. I have an Efficient Modem/Router but the ISP that provide the modem has locked this capability, therefore I can only use it as a Modem but not as a router. Perhaps this info can help.

This discussion is closed to new replies.