2 replies
by jonatay325 Accepted solution
by hal 9000 Accepted solution
It's better to only have the external HDD running when it's needed rather than all the time as they get hot and will eventually die faster than if mounted inside a case.
As to your question of Is it possible the answer would be [b]Probably Yes.[/b]
But there is no advantage in doing this so I would suggest that you just run the internal SATA Drive and use the external one for Backup Purposes as while it would be nice to have a Mirror Array every time that you shut down the external drive you'll get a HDD Failure message from the RAID Controller and when you turn it back on it will not necessarily rewrite the entire changes that have happened since it was last turned on unless you go through a Rebuild Process every time that you turn on the external drive.
As for the SATA Port on the PCI card there are different SATA Data leads that may allow you to use the second connection on the Card but the moment that you connect the internal drive to that the system will no longer Boot as the drivers for the PCI Card will not be in the Boot Sequence so as far as the computer is concerned you will not have a HDD to boot from.
It's much better just performing a backup on a routine basis and not attempt to setup a RAID.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending