9 replies
by thechas
You can use any "quality" DC power supply. I would avoid the inexpensive "universal" supplies.
I would look for one that specifically states that the Dc output is regulated. Using a regulated supply will protect your scanner from dammage.
Asto the current, the 100ma would be the minimum DC output current. So, a 300ma supply would work fine.
The next most important thing is to have the right connector and polarity. I always verify the polarity with a volt meter before I plug the supply into any device.
IF THE POLARITY IS WRONG, YOU COULD DESTROY THE SCANNER!!!!
A good mail order source for DC power supplies is Hosfelt Electronics. They likely have a 9 volt regulated power supply for under $5. They or another surplus shop, might even have the original HP power supply.
If you buy a "universal" supply, after you have the connector and polarity set properly, secure the connections so that they don't come apart, and someone puts them together wrong.
by sjclem
by big ray
Check some used computer stores. I have found replacement parts there for stuff that is no longer sold on the market. You could also try some computer warehouse places with clearance shelves. Global Computer Outlet is on such place. They have a clearance rack area and sell some really good stuff.
Other wise you can hunt flea markets, computer shows, etc. Don't laugh, I found a working HPLJ 6LP for $45 at a flea market once.
by sjclem
by stillatit
Depending on how you feel about Radio Shack, you might want to check this one:
9VDC/1000mA AC-to-DC Adapter.
$17.99 Brand: RadioShack
Cat.#: 980-0892 Model: 980-0892
Output voltage: 9 Volt
Up to 1000mA
Whatever you buy, as noted in other answers check the connector size/shape/polarity first!
Good luck.
by sjclem
Try batteries.com. They seem to have or am able to come up with any type of adapter, power supply or battery that I have needed.
What your are looking for is not on the input, but what the output is. As long as you can get a constant 100 mA outout at 9vDC, you will be fine. Makke sure that the connector is polorized right. If not, you can use your old plug.
Paul.
by sjclem
by sjclem
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending