Discussion Locked

ALR dual Pentium Pro motherboard....HELP

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently acquired an ALR 10175-b dual Pent Pro motherboard. Can anyone help with specs on this. I also am in need of a power supply. It has the std. ATX power plug but beside it is one that is a six pin plug (2 rows of 3 pins), what is this plug? I cannot seem to get a std ATX power supply to come on to power this board. All connections except for the power switch are clearly marked. There is only one plug left which looks like the right connector (and I thought it was) does nothing. Any helpwould be greatly appriciated.

6 replies

by thechas

First, as to the power supply.
What you need is a server supply.

As to information on the board itself;
From www.wimsbios.com it looks like ALR made OEM motherboards for Gateway.
Gateways site is very difficult to look through for motherboard information, but may be your only hope.
It will be easier, if you can identify the original Gateway system.

I also checked at www.driverguide.com
They list ALR as a video adapter mfg.
The links to ALR's site www.alr.com did not work for me.
Ofcourse, if the only motherboards they made were OEM type, then they may not even acknowledge that they made any motherboards.

Chas

by thechas

Oh, just out of curiosity, what are you planning to do with this "antique"?

After a certian point, it would be more cost effective to deal with a newer motherboard.

Chas

by richard_barsby

Hi as ans 1 has said it may be special but my guess is that you need a standard AT type power supply as the soft switch psu's were not around with the Pentium pro processors.

Rich

This discussion is closed to new replies.