Discussion Locked

AMD processor listed speed

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a curious kind of a question. I bought an AMD K-7 motherboard system last December. The processor was rated at 1.4 Ghz.
I ran a program called Belarc Advisor which shows a listing of hardware and software installed on your system. When I ran this with XP Pro, the processor stated that it was 1.4 Ghz.
I then networked it with another system running the novell 5.0 client on it some time later.
When I ran Belarc again it stated that the processor was running at 1050 Mhz(1.05Ghz).
Since that time I've upgraded to a second hard drive and ran different os's on it. Currently I'm running XP, 2000 and Redhat Linux on both drives.
My question is: Will the processor rated speed change depending on the hardware or network configuration or is it an AMD thing?
I would have even thought that I had the wrong stated processor but it originally ran as a 1.4 Ghz.
Anybody ever see this before or is there something I'm doing that might be causing this?
Thanks,
Mark

5 replies

by thechas

The CPU speed did not change. What changed, was what information Belarc Advisor reported to you.

AMD's XP series of Athlon CPU's are "performance" rated.
That is the rated speed of the CPU is the performance equivalant of the same speed Intel P4 CPU.
The actual clock speed of the Athlon XP CPU's is much slower than the rated speed.

What I suspect happened, is that the first time you ran Belarc Advisor, it reported what the BIOS read as the CPU model number.
The next time you ran it, (check the Belarc version) it reported the actual clock speed that the CPU is being clocked at.

Chas

by albert the skeptic

Since you run Linux sometimes, you might be able to learn something interesting about effective speed. During startup, Linux reports a "bogomips" speed based upon a fairly simple-minded loop. My 500MHz ppc iMac running Yellow Dog Linux reports very nearly 1000 bogomips The mips part is million instructions per second, the bogo part means take it with a pinch of salt. It would be interesting to know how the AMD processor speed is reported. Naive expectation is of course 1400.

by Former member

This question was closed by the author

This discussion is closed to new replies.