Discussion Locked

AMERICAN MEGATRENDS AMBIOS VERSION 1.19

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
MY PC HAS WINDOWS 98 AND THE BIOS VERSION IS 1.19. I WANT A BIGGER HARD DRIVE OF 20GB AND SDRAM 128MB, WILL THE BIOS VERSION SUPPORT IF I INSTALL THE NEW HARD DRIVE AND SDRAM? WOULD YOU PLEASE HELP ME TO CLARIFY THIS?

9 replies

by dmiles

This depends on how new the system is,check the start up screen and there will be a date as to when the bios was released,most bios need to be updated to support large hard drives,look up the motherboard spec number and the bios manufacturer and then locate a flash utility to update the bios.
The memory should not be a problem,you will have to match memory to the motherboard bus structure.

by nsceml

That is dependant on the engineer who wrote the bios you need. Go to the website of the mfg. that made your motherboard. Find your board and download the latest bios revision. Sometimes they will include a summary of the changes and what was updated, sometimes they don't. Thats about all you can do. Maybe it will include the updates you need. Just make sure to get the correct bios and email if I can help farther

by nsceml

Also, if the update doesn't include support for large HDD's Normally the drive MFG. will include a utility to use the large drive in your computer. I have an Intel Tucson, the latest bios revision only supports to 8gb. But I used Maxtor's MAXBlast utility and it is now spinning a 7200rpm 20.4gb IDE HDD.

by roland63

Adding the ram is a none-issue so as long as the MoBo supports it.

As for the HD, unless you're installing a SCSI, you have nothing to worry about with the bios being updated for most HD vendors include their own utilities for fooling, err, excuse me, "bypassing" the bios stubborn ways of thinking anyways.

I'm not saying not to upgrade the bios, that is a good thing, I'm just saying don't sweat it as far as the bios "playing nice" with the HD.

Good luck.

This discussion is closed to new replies.