5 replies
by dcosgrove
by tranman
Sorry I didn't say more--there is a jumper that selects onboard codec/AMR- it's set to codec. Another jumper selects onboard codec master/slave- it is set to master. In the bios you can select codec disabled/auto- it is set to auto. BTW, this is apparently a PC Chips motherboard with Amptron printed on the box to confuse rookies like me.
Also, I have cleared the bios about a zillion times, reloaded the OS (wiped the H/D for good measure), loaded both the performance and non-performance defaults of the bios; etc; etc.
by ridire
Start Windows in safe mode, go to Device Mangler and then "Sound, Video & Game Controllers" and remove EVERYTHING there. Restart the computer from a cold, power off state and the devices should be detected properly!
It sounds like multpile entries in the Dev Man, and they will only be visible in Safe Mode.
--Paul
by tranman
Sorry to be so slow on the response. I tried your trick. Nothing in "S,V&GC".
I have given up, and went out and bought a Soundblaster live value. That works fine. Go figure.
by tranman
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending