Discussion Locked

Aptiva 28.8 Mwave modem and Windows 98

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My Dad has an IBM Aptiva 2168-A45 PC which was purchased at least 4 years ago. He just upgraded to Windows 98. When trying to connect to the internet, he gets a message saying that Dial Up Networking could not complete the connection, then somethingabout check to make the modem is setup properly, or something. It refers to error code 630. We've checked all his modem and dial up settings. He's also checked them with blackfoot.net, his ISP. Any advice, good news, bad news? He's tempted to go back to Windows 95. Don't know how easy that would be. He's uninstalled and reinstalled the modem and getting nowhere. Is this modem compatible with Windows 98? Does he need to buy a new modem? I've checked IBM's website and am not getting anywhere.

3 replies

by dmiles

Windows 98 is notorious for detecting ans installing any modem,try moving the modem to another slot and let the hardware wizard start,but donot let windows detect the modem select to pick from the list and manually install the modem,now the 630 error is saying port is disconnected due to hardware failure.See error section Microsoft KB Article Q190554,it may save you a few dollars

by dana803

Thank you for your great input. The information was wonderful. We tried everything, but nothing worked. He ended up getting the modem replaced. With all the other problems he continued to have, he finally broke down and bought a new computerlast week. :-)

This discussion is closed to new replies.