12 replies
Greetings,
1. Install the processor and the RAM onto the motherboard (before you put the motherboard into the case).
2. Install the motherboard into the case.
3. Install the hard drive.
4. Install any additional hard drives.
5. Install the CD ROM drive.
6. Install the floppy disk drive.
Note: On all drives, make sure the red edge of the ribbon cable is plugged into pin number one.
7. Install the graphics card.
8. Install any other expansion cards. (The order is not important.)
9. Turn the computer on.
10. AutoDetect the IDE devices (hard drives) in the BIOS
11. FDisk the hard drive.
12. Load the operating system.
13. Establish necessary network connections.
14. Install the applications.
Good luck,
Maxwell
.
.
In addition, check out these links:
(REMOVE SPACES from the pasted URLs.)
http://www.daileyint.com/build
Best of luck,
Maxwell
by momatec
by q2ggirl
Not quite what type of response you are looking for, but I will try to help.
Once you unpack everything, connect the keyboard/mouse to the PS2 ports. They should be color coded on the ends of the connectors as well as on the back of the CPU.
Connect your monitor to the back of the video card. The ends won't be color coded, but you can easily match the shape of the connector to the video card. It will only connect one way.
If you have spekers, plug the connector into the sound out on your sound card. Sometimes the ends are color coded. If not, once you turn the computer on, you can try the connections on the sound card by trial and error.
Connect the power cords, and you're good to go.
Also, if you have a scanner or printer to connect, the ends of these connectors will only connect one way regardless of if they are USB or parallel.
Note: Turn your peripherals on first before the computer and that way, as windows starts up, it will find the devices and prompt you for the drivers.
Hope this is what you were looking for.
by q2ggirl
by shanghai sam
Regards,
It is true you missed the question. All I need is the A to Z stages of assembling a desktop computer. In your include, if possible, the precautions and basic hardware parts required for this process.
Thanks in advance.
by momatec
by momatec
Hi,
Maxwell attempted to answer the question correctly as per my expectation, but did not tell me the necessary precautions I should take or even never listed the basic hardware required for this process.
by thechas
mw's list is a good starting point.
A. Requirements: office, web, gamer?
What OS?
Start with 900MHz, 256MB RAM, 32MB Video, 30 GB HD, flop, CD/RW, sound, modem, 250W PS. Step up as budget allows.
For gamer, budget sets limits. Upgrade video first, then CPU, PS, RAM. Add case fans.
Case, kybd, mouse, spkrs, monitor are to taste.
Spend more on keyboard for someone who will be typing a lot.
Make sure case has ample room. Avoid mini/micro-ATX.
B. Get all the info you can on parts. READ MANUALS!
Go to mfg web sites, read FAQ, download driver and BIOS updates.
Case should come with all hardware. MB and drives should have cables. Except OEM packaged drives.
C. ASM. (addons to mw list)
Work with enough space to not be cluttered.
Use ESD wrist strap when handling MB, CPU, RAM, or cards.
Remove MB tray from case.
Install drives in chassis. Set jumpers correctly, make sure cables reach between MS & SL drives.
Set MB Jumpers.
Install RAM, CPU, H-S/Fan.
Mount MB to trayper MB mfg recommendations.
If MB came with I/O shield, compare case and MB shields, choose the one that works best. Remove knockouts from shield as needed.
Install MB tray into case.
Connect PS to MB.
Connect case wires to MB.
Connect and route audio cable from CD drive.
ASM cables to drives and MB.
Steps 7-8; Start with video card only.
Connect kybd, mouse, monitor. If PS has pwr switch, set to 0/off, then plug in pwr cord.
Switch to on.
Press pwr sw.
Enter BIOS setup.
At minimum, set date/time, drives, I/O, pwr mngt to needs/taste.
Steps 12-13; Install MB drivers, DirectX, then video driver.
Install drivers/add-on cards 1 at a time. Shut down before installing cards.
Connect CD audio cable to sound card.
Install application software.
Go on-line. Install updates to OS, A-V, and software.
Test system for awhile.
Scandisk & defrag when complete.
More detail would require a book.
by momatec
by momatec
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending