Discussion Locked

ATA66/ATA100 drives and cable Length

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I neeed to excede the cable lengths for a stack of 4 ATA100 hard drives Maxtor model Diamond max 5T060H6 using a Abit Vp6 Dual 1 GHZ pentium chip mother board with a high point tecnologys HTP 370 controller chip. the reason for this is room for the undebellie fans for the stack of 4 hard drives. High point recomends cable lenths no longer than 18" but i need 24". has any one experimented with longer cable lenghts. Please let me know how it worked out . The os is windows server 2000. i want to do 1+0 stripping and mirroring on the server. thanks

9 replies

by mckaytech

With pain-staking attention to cable routing and using quality IDC connectors, I've used IDE cables as long as 28 inches without problems.

But I would do some heavy duty testing before using this particular setup on a production server because the cables will be more sensitive to noise and that could increase error rates in the data being transmitted.

paul

by astrocat123

you did not say if you have ysed the longer cable lenths with a controller card or not could you please clearafiy your answer.

by mckaytech

Oh, give me a break. Unless I'm missing something, if the drives are on one end of the cable, I would expect there to be a controller (technically a host adapter) on the other end. Within the IDE specification, there is no distinction made betweena host adapter embedded on a motherboard versus a controller card and I would not expect any difference between the two.

If you're asking if I have duplicated your exact setup as regards drive, controller chip and motherboard and then lengthened the cable, no I haven't. That's something you might want to try yourself since the cost to do so is just the trivial cost of a cable and you seem ill-inclined to accept the value of other people's experiences.

paul

paul

by saihib

The official IDE specs state that 18" is the max cable length. Use longer at your own risk and don't expect any support from hardware vendors.

by radioboob

I have a system using custom made cables and they are slightly longer than 24" but I am not using raid. I have a win98SE system. I take it you are using a server mother board or else you will need to buy a ATA controller card that offers Raid.

This discussion is closed to new replies.