7 replies
by jlouis45
The wires that go from the atx power supply box are :
1. Powersupply to the main motherboard
2. Harddisk Drive
3. You have a small pin connector for the flopy drive.
4. For the CD Drive.
5. If available then you need for the CD RW drive.
by netfleet
by wanabedrsean
the awnswer that was given first isnt the awnswer you wanted:ATX Motherboard Power Connector
Description Name Pin Pin Name Descript
Power +3.3V +3.3V 1 11 +3.3V Power+3.3V
Power +3.3V +3.3V 2 12 -12 VPower12V
Grd GND 3 13 GND Ground
Power +5V +5V 4 14 PSONPowOn/Off
Grd GND 5 15 GND Grd
Power +5V +5V 6 16 GND Grd
Grd GND 7 17 GND Grd
PowerGoodPWRGD 8 18 +5 VPower+5V
+5V VSB +5V VSB 9 19 +5V Power+5V
Power +12V +12V 10 20 +5V Power+5V
by wanabedrsean
This is for at power supply
Pin Funtion Wire color
1. Power Good * Orange
2. +5Vdc Red
3. +12Vdc Yellow
4. -12Vdc Blue
5. Ground Black
6. Ground Black
7. Ground Black
8. Ground Black
9. -5Vdc White
10. +5Vdc Red
11. +5Vdc Red
12. +5Vdc Red
by wanabedrsean
as you can see there are no 3.3 volt connectors on a at power supply so what you want to do will not work.
ps:The color information is just given as general reference There is no strict standard for coloring so actual coloring used in your computer might be different
by netfleet
by netfleet
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending