3 replies
by thechas
If I am interperting the error correctly, the boot section of the BIOS code has a checksum error.
The most likely cause of this is a BIOS virus.
The BIOS is requesting that you "flash" the BIOS to re-fresh the code.
To do this, you need both the awdflash program, and the BIOS code file from the motherboard manufacture. If you have a CD for the motherboard, both may be on it.
I recommend downloading the latest version of both from the motherboard manufacture.
If you need help identifying who made your board, or their website, check out either www.wimsbios.com
or www.motherboards.org
Create a DOS boot disk on another PC, and copy the extracted awdflash and BIOS code files onto the disk.
Write protect the floppy.
Boot from the floppy, and allow the BIOS to invoke the flash program.
Then flash the BIOS with the new code on the floppy.
Reset the CMOS memory, and you should be back in business.
It is possible that the BIOS chip itself has become electrically damaged. In that case, you need to contact a local dealer for your motherboard mfg, and see if they can order a new BIOS chip for you.
Beyond that, it will not cost much more for a new motherboard than a 3rd party programmed BIOS IC.
Chas
by dtmw2002
by dtmw2002
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending