Bad RAM ??
Hi - question about RAM
just intstalled an extra 256mb of ram in a
p3 566 celeron. Ram was 133mhz (old was 100mhz)
Wouldn't boot - no beeps - just bios?
after removing the new dimm - hard drive physical failure! Can boot from a floppy or Cdrom - checked all cables - switched cables - switched from primary to secondary - nothing!
Can boot from floppy and system is fine.
Tried again with new RAM - nothing - but with only old RAM - boot from floppy
Can Bad RAM possibly affect the hard drive?
or is this just the craziest coincidence ever?
P3 celeron 566 - seagate 8.4gb drive
thanks in advance
Carman