Discussion Locked

Best Scanner?

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to purchase my first scanner for a small business. I have no experience with scanners. Any suggestions as to brand, software and installation.
Thanks So Much

17 replies

by rmarte

I'm not sure the level of activity/utilization of such scanner in yor office environment. However, for starter, you could not go wrong with either CanonScan N656U or CanonScan 1220U. I have the N656U myself.

Good luck,

Rafael

by csmith

The basic selection of a scanner depends on what you need it for. We use HP SCSI scanners because we needed the speed. The problem is that they are expensive and difficult to install. Because Smith & Young is a VAR, this is not a problem, but for most of our small/home business customers we recommend Parallel Port scanners and USB scanners, in that order.
The parallel scanners are the easiest to install, if you have a extra parallel port. If you try to chain them, you are asking for trouble. USB is getting a lot better, but it still generates business for us.
The parallel port scanners are slow.
If you plan to install the scanner your self, purchase it someplace you can take it back to.
The software packages that you run depend on the type of business you are in.
Regards, Chris csmith@smithandyoung.com

by csmith

Most of the SOHOs that need somthing beyound the basic package that comes with the scanner run Corel Draw. I would start with the basic package included with the software, get some experience, and then decide if you need more sophisticated software

by agiias

With SCSI chain in place adding additional devices (external CDRW in my case) was pretty much plug in and run.

by dcassat

Although I have used HP scanner's and always been happy, I have also used UMAX and Epson scanners and been pleasantly surprised. For the latter unit I went to Cnet.com and found so much good information that I think you should try the reviews and customer comments. This is an excellent site when you're in a quandery like this. I hope this helps!

by kloran-[thrawn34

I would suggest a HP scanner. Usually a 1220*800 DPI. As for software I am not sure which would work best for you it all depends on what other hardware you have and how much you can spend on extra software. Usually most scanners come with their own software suites.

by james a bailey

We currently went through the same prcess you speak of. We decided use a Canon Scan 1200S with SCSI interface and ADF running on Windows NT 4.0. Excellent scanner. This decsion was made afer buying an HP 6350CSE. I ended up back at the store 3 timesand got 3 different scanners because it would not setup properly. Canon setup without a hitch.

As for software we use Omni Page Pro 10. We always have a new person Scanning Resumes. With this setup, learning curve is very minimal. Newbies seem tohave no problem.

Good Luck

by wlbowers

If you just want to scan a couple of things now and then you can get a usb scanner. $50 to $150,look at Hp, Umax, MicroTek, Canon, or Epson, not necessarly in that order. Don't get a parallel port scanner. They don't always work with your printer and you wind up having to buy a second parallel port card. If your going to have to buy a card to run your scanner, (you don't have usb), buy a usb card.

If you are going to be scanning multipage documents and run optical character recognition on them, you are going to want to kick up on the quality of the scanner and add a sheet feeder. $500 up. You should be looking at Fujitsu, Agfa, Panasonic, Umax, and Epson, not necessarly in that order. You can get cheap sheet feed combinations but theyare slow and the results are not always what you expect, ie: jammed paper poor scans, crippled software, ect. The scanner sheet feed combo's from the above have good software, and hardware.

For high end graphics the line of scanners listed for the sheet feeders will work for this as well.

Most of the high end scanners will be either firewire or scsi. Unless you are going to be doing high end graphic scans, you don't need the firewire go with scsi. Most of the listed scanners makers have amodel that will have a scsi card along with ocr and photoshop le or another graphics software bundled.

Stay away from the junk brands and the all in one units. (printer, scanner, fax, cappachino machine, ect) These might be fine for joe citizen but for a business when something dies they all die.

My personal scanner is an Epson 800 SCSI. I use it for high end graphics and occasional ocr.

I hope this helps you in your decision.
Lee

This discussion is closed to new replies.