Windows isn't a factor in this problem. No Windows bootable CD or boot disk will do you any good if the hard drive can't be detected reliably.
Couldn't find a listing for a Maxtor model #91360U34, but did find one for a 91360U4
Did this drivepreviously work or is it a new addition?
Have you made any other hardware changes to your computer recently?
Since the problem appears to be intermittant, we can narrow down the possible causes for the problem:
From your CPU, it sounds likeyour system may be several years old. Your BIOS may not directly support this size drive. Have you tried using the MaxBlast installation software that came with the drive?
If the drive were not jumpered correctly, you probably would never detect it, but double-check this anyway.
You could have a bad drive cable or it may not be seated properly. Double check that the drive cable is seated correctly and firmly to both the motherboard and the drive. Maybe try a different drive cable.The Primary IDE channel could be bad on your motherboard. If the above doesn't work, try connecting to the other IDE channel.
You could have a bad power connector or even a bad power supply. When you notice a reduction in noise (as if the hard drive has stopped spinning, check to ensure the power supply cooling fan hasn't stopped spinning. Reseat the power connector to the drive. Maybe try a different power connector. Use a voltage tester to ensure you are getting the correct voltage atthe connector.
The hard drive could have failed. Try it in a different computer to see if it can be detected correctly.
Hope this helps.