Discussion Locked

bios or hardware problem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi.
i am having celeron machine.when i start the machine it checks for the floppy drive and give error that media is not proper .it gives continues error message even though i remove floopy drive.i cannot go into bios setup. how can i go to bios setup.wheather this is a bios problem or hardware problem.

7 replies

by opatzg9

You go into setup when your pc first powers up before the windows screens start coming up. Normally your display will tel you what key to hold down to enter setup or bios. On a lot of systems it is the key, some use f1, insert,or a combination of alt or ctrl and a key.
Hopefully yours displays as it comes up otherwise, go back to motherboards.com website and check it out there. I'ld gues that somehow your bios got corrupted and is expecting the wrong kind of device for the floppy andyou can reset it there in bios. Also your boot order can be changed and the floppy should probably be removed. If all else fails I have gotten into bios by doing a number of reboots in a row,, good luck!

by dcosgrove

It could also be that the hard drive has failed or become unable to boot. Try booting to a floppy and see if you can see the C:\ drive at all.

by yelhsa3840

unplug the floppy and try it, the most likely case is bad floppy drive i had the same problem and now my machine doesnt have a floppy drive

This discussion is closed to new replies.