Discussion Locked

Black Screen After Win 98 Start Screen

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can some one help me? My boss has a compact computer. When he turns the computer on the win 98 screen comes up and then the monitor just goes black and the hard drive stops. If I hit the escape key several times it will reboot and start just fine.

2 replies

by g.m.bakker (cne, self employed)

Looks like a driver issue,
as soon as the line
loading windows 98
comes up press F8, select save mode, If all looks okay (except the crappy safe mode screen) go into the system configuration and check to see if drivers for screen+video/ide controlller are the correct ones, also for a matter of safety check if the screen resolution/frequency isn't set too high. Start off with 800*600 at 60 hz, and try rebooting...

by carpetest1

I looked at the drivers and even reinstalled them. The weird thing is that if you hit any key ont he keyboard the darn thing will finish the boot up.

This discussion is closed to new replies.