As OpatzG stated, there is a W98 bug that CAN show up when you have more than 511MB of RAM installed.
This bug is VERY configuration dependant.
I do not know of any way to get past the delays you are referring to.
The only BIOS options that impacts boot speed are the memory test, often referred to as fast boot, and setting any unused drives to none instead of auto-detect.
There are several screens that are part of the 'normal' BIOS and W98 boot process.
Memory test
Drive detection
BIOS report screen (I believe this is the screen you are referring to)
W98 DOS boot
W98 Windows splash screen
W98 Desktop
The screen that displays your installed hardware is just an enumeration of the hardware list that the BIOS will report to Windows.
Any delay on this screen is likely caused by delays starting Windows.
There are numerous options in the W98 startup files that can be tweaked to control the boot process.
There is a boot delay that is there to allow you time to access the function keys should you wish to boot into DOS or Safe Mode.
The easiest way to adjust these settings, is to install TweakUI from Microsoft.
There will be a delay for the installation of any DOS mode drivers called up in Autoexec.bat or Config.sys
Generally, unless you need DOS mode access to hardware devices, both of these files should be empty.
(Some anti-virus programs load the scanner here so they can check for boot viruses.)
Next, run msconfig,
click on the startup tab,
see ifyou "need" all of the programs to run at startup.
You may have seen some other PCs that do not display the black device enumeration screen.
These normally display a splash screen for the system or motherboard using a BIOS option referred to as "Quiet Boot".
Chas