Discussion Locked

Bootable Hard Drive

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Maxtor 39098H4 40GB hard drive that was formated to use as a slave drive only, i.e. without system files. How can I make it a bootable drive and not lose the data already stored on the drive. I have about 6GB stored on the drive.

2 replies

by thechas

First, when the drive was set up, was it set up with a primary dos partition, or only an extended dos partition?

Second, are you going to use this drive as the Master drive for a system? Or for the second OS on a dual boot system?

If you are going to use the drive as a slave, and want to use the partition for the second OS, just install the second OS to the drive, and the system files will take care of themselves.

If you want to use this drive as a Master or single, you need to check the partition status.
You can check this with fdisk.

Assuming that you have a primary partition, it needs to be set to active for the drive to be the primary boot drive. The drive should also become the Master or single drive in the system.

You can add the system files manually, or just install the desired OS onto the primary partition.

You can add the system files 2 ways.

If the drive is in a system with the target OS installed, from My computer, right click on the drive, and select format.
Select copy system files only. That should take care of it.

If the target OS is different, boot with a floppy for the OS.
At the command prompt, type in
sys X: (Where X= the correct drive letter)

If you do not have a primarydos partition on the drive, and wish to use the drive as a primary master, or single, your only option to preserve your files is to use a partition utility such as partition magic.

by cvjack

Make a bootable floppy disk. Copy the file sys.com to it. Boot to it. If you have the 40GB installed as the primary master, type - sys c: If it's set as a slave or D-drive type - sys d: Done.

This discussion is closed to new replies.