Discussion Locked

bypass.v.r.m.for processor

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i have a dell power edge 1400 server unit.the mother board has two processor sockets.up to 1.5 ghz.i have one 733mhz proc' installed with a voltage regulator module installed .i have a second processor but no vrm.ihave some old m'boards i picked up with a vrm slot on them,although they have no vrm,but have jumpers in place instead.some four or so on around16 pins.is it possible to remove my existing vrm and place jumpers across certain pins[at my own risk] even if it means a slight reduction inperformance.the reason being for this is that i have had great difficulty in obtaining a second vrm.system spec's at moment are 733mhz proc' 133bus,256 cache 512mb ecc 133 sd ram,quantam atlas scsi hard drive[9gb]uniprocessor support?do i need added system requirement from microsoft.i am running win xp pro

7 replies

by thechas

The motherboards that have jumpers on them have a voltage regulator built into the motherboard.

The jumpers are used to set the CPU core and sometimes the I/O voltage.

Unless I am mistaken, your server motherboard will not have anywhere near the correct CPU core voltage available on the pins.

Undervoltage will reduce system performance.
Overvoltage will reduce CPU life.
If insufficient current is available from an improvised setup, you will have bizarre system crashes.

I don't know what performance improvements you expect from adding the 2nd CPU.
The main improvent will be if you are running multiple applications simultaneously, and the CPUs can effectively split up the workload.

I would wait until you can find a second correct VRM. While CPUs come down in price everyday, you risk crashing your entire system, and perhaps destroying your motherboard and connected periphials.

Chas

by opatzg9

I'ld have to agree with Chas. Running jumpers wher you have no idea what it would do can not improve your situation. Wouldn't a faster processor/newer motherboard do more for you than 2 processors? There are a number of upgrade kits available out there that still use the pc 133 sdram with 1.7-2.4ghrz processors from 129-199.SCSI may be an issue though.
Good luck.

by alpha-male

Don't do it....

Honestly, even if you get the machine to power up it's almost a certainty that you'll have all kinds of stability issues. It's just not worth the effort.

I had to find a vrm for my DEC Personal Workstation so I could add a second processor to it a few months back. I kept an eye out on Ebay and found one after about a week for less than $10. If you can't get one through Dell as a spare, Ebay is probably your best bet.

Good luck...

This discussion is closed to new replies.