Discussion Locked

Cam is not read by the USB port.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently installed a Logitech Quickcam Pro 3000. The software was installed properly and the cam was connected to a usb port. but when I started using it, I get a picture showing me to connect the cam to the port even though it is already connected. 1 USB port only works on the live broadcast but when used as a webcam it stops and the IM says cam is not connected. The technicians in the shop were I bought my unit are also wondering about this problem coz they tried the 5 usb ports on a simple mouse and it worked. My motherboard is ASUS CUSI-M SiS 630E AGPset. Tried contacting ASUS but no avail. can you help me?

5 replies

by jaqui

1) is cam usb 2 and port usb 2? ( or both usb 1 )
if that matches then it could be one of two things.
the ports are faulty or the cam is faulty.

with the mouse working then it is more likely that the cam has a fault in it somewhere.

how manyof the five usb ports are built into the board? try one of those specifically with the cam, as it couls be a bad wire on the other ports.

by mcarmcpnzn

actually there are two usb ports on the board but it didn't work there. I was wondering about the cam coz it worked on a Pentium 1 gig processor Win Me OS and on an Win XP OS. The cams min requirement is Pentium III 350, OS Win 98, ME and XP. Mineis Pentium III 866 OS Win Me. It really puzzles me.

by goldritchie

Can't help but having the same problem. Running XP on an ASUS P4B motherboard. Tried swapping cams etc but think its a video capture device failing. Am looking at VFW/WDM type upgrade (?) I'll keep you posted if I have any success

by mcarmcpnzn

I guess you are right about the video capture device. Thanks for the idea. I really looked into it. Also, comtemplating on changing my motherboard. What a waste!

This discussion is closed to new replies.